Spesifikasi Pressure Vessel for Fuel Storage Stability
Alat Laboratorium Umum
K10600 Pressure vessel,4 unit
K10601 Pressure vessel,6 unit
K10603 Pressure vessel,10 unit
Used for assessing potential storage stability of middle distillate fuels, including fuels with or without stabilizer additives, and freshly refined or previously stored fuels. The sample is aged in a pressurized vessel at constant temperature for 16 hours and, after cooling, the total amount of insoluble products is determined gravimetrically.
- Conforms to the specification of ASTM D5304
- Four, Six and Ten unit models
- Stainless steel pressure vessels accommodate multiple sample containers for determining storage stability of fuels by the oxygen overpressure method. Vessels meet all applicable ASME and ASTM safety requirements for construction and working pressure and maximum operating temperature and are equipped with pressure safety valves factory present at 200psi (1,332kpa). Included with each model are a collapsible glassware rack that installs and removes easily for cleaning, oxygen inlet and outlet valves with quick disconnect fittings and charging hose, pressure gauge and wide-mouth closure with viton O-ring seal.
- Glassware rack, hinged, for four, six or ten sample containers
- Charging hose with pressure tight crimp and quick disconnect
-
Conforms to the specifications of:
ASTM D5304
Capacity: Four, six or ten sample containers
Construction: 316 stainless steel, in accordance with ASME specifications
Working Pressure at 90°C: Exceeds ASTM requirements
Safety Relief Valve Setting: 200psi (1,332kPa)
Pressure Gauge: 0-200psi
-
K10600: 81⁄2" high by 91⁄2" round
K10601/K10602: 151⁄2" high by 91⁄2" roundNet Weight:
Low Temperature: 740 lbs (335.7 kg)
Pressure Viscometer:119 lbs (54.0 kg) -
Shipping Weight:
Low Temperature: 1089 lbs (494.0 kg)
Pressure Viscometer: 189 lbs (85.7 kg)Dimensions:
Low Temperature: 58x43x67 in. (147.3x109.2x170.2 cm)
Pressure Viscometer: 36x18x39 in. (91.4x45.7x99.1 cm) - K10540 Sample Container with lid